If you work with Huawei smartphones or tablets for tasks like flashing, unlocking, or repairing, installing the Huawei USB COM 1.0 Driver on your PC is essential. This driver allows your Windows computer to properly detect Huawei devices in COM 1.0 mode, which is necessary for operations such as FRP bypass, firmware flashing, unbricking, and boot repair.

In this guide, we’ll explain what this driver is, why it’s important, highlight its key features, and show you how to download and install the latest auto-installer version easily.

The Huawei USB COM 1.0 Driver is a Windows driver that enables your computer to detect Huawei devices when they boot into COM 1.0 mode (also known as USB Serial Port mode). This special mode is commonly used for advanced servicing tasks, such as:

• Bypassing FRP (Factory Reset Protection)
• Flashing stock firmware
• Repairing IMEI or network issues
• Unlocking or unbricking Huawei devices

Without this driver, your PC will not recognize the device in COM mode, and essential tools like SigmaKey, EFT Pro, MRT, or Hydra Tool may fail to work correctly.

Here are the main reasons why this driver is essential for anyone servicing Huawei devices:

• ✅ Easy Automatic Installation – The latest version includes an auto-installer, so no manual configuration is required.
• 🔌 Stable Connection – Ensures reliable communication between your Huawei device and Windows PC.
• 📱 Wide Device Compatibility – Works with almost all Huawei smartphones and tablets, both old and new.
• 🧰 Compatible With Popular Tools – Fully supports major unlocking, flashing, and FRP bypass tools.
• 🖥️ Supports Multiple Windows Versions – Works on Windows 7, 8, 10, and 11 (both 32-bit and 64-bit).

Download the latest version of the Huawei USB COM 1.0 Driver (Auto Installer) from the trusted links below:

• 👉 Download from Google Drive

• 👉 Download from MediaFire

Follow these steps to install the driver on your Windows PC:

1. Download the ZIP file from one of the links above.
2. Extract the contents to a folder on your desktop.
3. Right-click the .exe file and select "Run as Administrator."
4. The auto-installer will open. Click "Next" to begin the installation.
5. Wait until the installation is complete, then click "Finish."
6. Restart your PC to apply the changes.

If the driver is not working or your device is not detected, try these solutions:

• ✅ Disable Driver Signature Enforcement on Windows (especially for Windows 10/11).
• ✅ Use a different USB cable or USB port.
• ✅ Close HiSuite or other Huawei PC software that may interfere.
• ✅ Reinstall the driver and restart your PC.

The Huawei USB COM 1.0 Driver is a crucial tool for anyone performing advanced tasks on Huawei devices, such as FRP bypass, firmware flashing, and repairs. The latest auto-installer version makes installation fast and hassle-free.